Zoom LiveTrak L-8 Portable 8-Channel Digital Mixer and Multitrack Recorder - Manual (Page 17)

█ RECORDER mode
④ SETTING button
⑧ OVERDUB button
⑦ REC button ⑥ PLAY button
⑤ STOP button
① REW button
③ TEMPO button ② FF button
① REW button
Press to move to the previous mark.
Press when at the beginning to move to the previous project. Press and hold to search backward. (The longer
pressed, the faster the speed becomes.)
② FF button
Press to move to the next mark.
If it is the last mark, this moves to the next project. Press and hold to search forward. (The longer pressed, the
faster the speed becomes.)
③ TEMPO button
This sets the tempo of the metronome built into the recorder.
The tempo will be detected from the average value when this button is pressed repeatedly.
When the METRONOME setting is enabled, during recording and playback and when the Delay effect, which
synchronizes with tempo, is selected, the button blinks at a tempo of 40.0–250.0 bpm.
④ SETTING button
Press to open the SETTING screen.
⑤ STOP button
This stops the recorder.
⑥ PLAY button
Press to start recorder playback.
• During playback, it lights green.
• When playback is paused, it blinks green.
17