Zoom LiveTrak L-8 Portable 8-Channel Digital Mixer and Multitrack Recorder - Manual (Page 45)

Redoing parts of recordings (punching in/out)
Punching in/out is a function that can be used to rerecord parts of already recorded tracks. "Punching in" is
switching track status from playback to recording. "Punching out" is switching track status from recording to
playback.
With the
, punching in/out can be conducted using buttons on its top.
REC button
Display
Selection encoder
RECORDER mode button
REC/PLAY buttons
OVERDUB button
PLAY button
STOP button
REW button
1.
Press so that it lights.
This opens the RECORDER screen.
2.
Press to turn it on (lighting it).
3.
Press repeatedly for the channels to redo until they light red.
4.
Press or turn left to move to before the part to be rerecorded.
5.
Press to start playback.
6.
Press at the position where you want to start rerecording (punch in).
7.
Press to end rerecording (punch out).
NOTE
• Punching in/out overwrites recordings.
• Punching in/out can be done up to 10 times each time playback is started.
8.
Press to stop playback.
45