Zoom LiveTrak L-8 Portable 8-Channel Digital Mixer and Multitrack Recorder - Manual (Page 97)

Changing the sampling rate
The file format used when recording to the recorder depends on this setting.
SETTING button
Display
Selection encoder
RECORDER mode button
1.
Press so that it lights.
This opens the RECORDER screen.
2.
Press so that it lights.
This opens the SETTING screen.
3.
Use to select SYSTEM > SAMPLE RATE.
4.
Turn to select the sample rate, and press .
HINT
This can be set to 44.1 kHz, 48 kHz or 96 kHz.
NOTE
• Format an SD card before recording to it at 96 kHz. Without formatting first, skipping could occur when
recording.
• When 96 kHz is selected, some functions are limited. The limited functions are as follows.
– SEND EFX: disabled
– EQ: disabled
– OVERDUB: disabled
– Audio interface: disabled
– SOUND PAD: disabled
– MONITOR OUT: output signal same as MASTER only
• If a project is loaded that has a different sampling rate than the setting, recording and playback will not
be possible.
97