Zoom LiveTrak L-8 Portable 8-Channel Digital Mixer and Multitrack Recorder - Manual (Page 52)

SOUND PAD functions
Audio files (WAV format) can be assigned to the SOUND PAD 1-6 buttons. Press one to play the assigned file. The
level and playback method can be set for each pad. These are useful, for example, for playing effect sounds dur-
ing podcasting and streaming as well as during live theater and music performances.
NOTE
When the sample rate is set to 96 kHz, the SOUND PAD function cannot be used.
Playing sounds with SOUND PAD buttons
When shipped new from the factory, the contains 13 sounds, 6 of which are already assigned to SOUND PAD
buttons.
Channel faders
SOUND PAD 1–6 buttons
INPUT SEL buttons
1.
Press for channel 7 or 8, to switch its input to the SOUND PAD buttons, which light if they have sounds
assigned to them.
• SOUND PAD 1, 2 and 3 are input on channel 7.
• SOUND PAD 4, 5 and 6 are input on channel 8.
2.
Press a SOUND PAD.
This plays the sound assigned to that SOUND PAD.
The volume can be adjusted using the channel 7 and 8 faders.
The audio quality can be adjusted (
→ “Adjusting the tone and panning” on page 30 ) and an effect
can be applied ( → “Using the built-in effects” on page 31 ) in the same way as other channels.
NOTE
SOUND PAD playback on a channel can be stopped by pressing 4 times in a row.
52