Recording and playback, Preparing to record, Recording and playback ��������������� 40 – Zoom LiveTrak L-8 Portable 8-Channel Digital Mixer and Multitrack Recorder User Manual

Page 40: Preparing to record �������������������� 40, Inserting sd cards

Advertising
background image

Recording and playback

Preparing to record

Inserting SD cards

SD

card slot

POWER

switch

1.

Set

to OFF.

2.

Open the SD card slot cover, and insert an SD card all the way into the slot.

To remove an SD card, push it further into the slot and then pull it out.

NOTE

• Disable write-protection on the SD card before inserting it.
• Always set

to OFF before inserting or removing an SD card.

Inserting or removing a card while the power is on could result in data loss.

• When inserting an SD card, be sure to insert the correct end with the top side up as shown.

• If an SD card is not loaded, recording and playback are not possible.

• Formatting an SD card (

“Formatting SD cards” on page 92

)

• Use an SD card that is Class 10 or higher.

• Format an SD card before recording to it at 96 kHz. Without formatting first, skipping could occur when

recording.

40

Advertising