Zoom LiveTrak L-8 Portable 8-Channel Digital Mixer and Multitrack Recorder - Manual (Page 49)

6.
Press to light it and start recording standby.
The MASTER level meters will blink at the level that will cause automatic recording to start.
HINT
Recording starts automatically when the input exceeds the set level (shown by the MASTER level meters).
Recording can be set to stop automatically when the input goes below a set level. ( → “Setting automatic stop-
ping” on page 87 )
7.
Press to end recording standby or stop recording.
NOTE
• This function cannot be used with the PRE REC, METRONOME or PRE COUNT functions. When AUTO REC is
turned on, these other functions will be disabled.
• When the OVERDUB function is enabled, the AUTO REC function will be disabled.
49