Sun Microsystems 6900 - Manual (Page 45)

Chapter 3 Troubleshooting Tools 25
Sun Proprietary/Confidential: Internal Use Only
Generating Component-Specific Event Grids
The Storage Automated Diagnostic Environment generates component-specific event
grids that describe the severity of an event, tell whether action is required, provide a
description of the event, and recommended action. Refer to Chapters 5 through 9 of
this troubleshooting guide for component-specific event grids.
▼ To Customize an Event Report
1. Choose the Event Grid link on the the Storage Automated Diagnostic
Environment Help menu.
2. Select the criteria from the Storage Automated Diagnostic Environment event
grid, like the one shown in in TABLE 3-1 .
TABLE 3-1 Event Grid Sorting Criteria
Category Component Event Type Severity Action
• All (default)
• Sun StorEdge
A3500FC array
• Sun StorEdge A5000
array
• Agent
• Host
• Message
• Sun Switch
• Sun StorEdge T3+
array
• Tape
• Virtualization engine • All
(default)
• Backplane
• Controller
• Disk
• Interface
• LUN
• Port
• Power • Agent Deinstall
• Agent Install
• Alarm
• FC +
• Alternate Master -
• Audit
• Communication Established
• Communication Lost
• Discovery
• Heartbeat
• Insert Component
• Location Change
• Patch Info
• Quiesce End
• Quiesce Start
• Removal
• Remove Component
• State Change +
(from offline to online)
• State Change -
(from online to offline)
• Statistics
• Backup
critical (error)
alert (warning)
system down
Yes —This
event is
actionable
and is sent to
the RSS/SRS
providers
No —This
event is
nonactionable