Sun Microsystems 6900 - Manual (Page 119)

Chapter 8 Troubleshooting the Sun StorEdge T3+ Array Devices 99
Sun Proprietary/Confidential: Internal Use Only
enclosure Audit Auditing a new Sun
StorEdge T3+ array
Audits occur every week.
The Storage Automated
Diagnostic Environment
sends a detailed
description of the
enclosure to the Sun
Network Storage
Command Center
(NSCC).
ib Comm_
Established Communication regained
InBand (ib)
oob Comm_
Established Communication regained
oob (OutOfBand)
ib Comm_Lost Down Y Since InBand (ib)
monitoring is established
using
luxadm, the
monitoring may not be
activated for a particular
Sun StorEdge T3+ array.
1. Verify luxadm with
the command line
(
luxadm probe,
luxadm display)
2. Verify cables, GBICs,
and connections along
the data path.
3. Check the Storage
Automated Diagnostic
Environment SAN
Topology GUI to
identify the failing
segment of the data
path.
4. Verify the correct FC
switch configuration,
if applicable.
TABLE 8-1 Storage Automated Diagnostic Environment Event Grid for the Sun StorEdge T3+ Array
Component Event
T
ype
Se
verity
Action Description Action