Sun Microsystems 6900 - Manual (Page 139)

Chapter 9 Troubleshooting Virtualization Engine Devices 119
Sun Proprietary/Confidential: Internal Use Only
2. Optionally open a Telnet session to the virtualization engine and run the
runsecfg utility to poll a live snapshot of the virtualization engine map.
Refer to “To Failback the Virtualization Engine” on page 120 for instructions about
how to open a Telnet session.
From the virtualization engine map output, you can match the VLUN serial number
to the VLUN name (VDRV000), the disk pool (t3b00), and the multipath (MP) drive
target (T49152). This information can also help you find the controller serial number
(60020F2000006DFA), which you need to perform Sun StorEdge T3+ array LUN
failback commands.
Determining the virtualization engine pairs on the system .........
MAIN MENU - SUN StorEdge 6910 SYSTEM CONFIGURATION TOOL
1) T3+ Configuration Utility
2) Switch Configuration Utility
3) Virtualization Engine Configuration Utility
4) View Logs
5) View Errors
6) Exit
Select option above:> 3
VIRTUALIZATION ENGINE MAIN MENU
1) Manage VLUNs
2) Manage Virtualization Engine Zones
3) Manage Configuration Files
4) Manage Virtualization Engine Hosts
5) Help
6) Return
Select option above:> 3
MANAGE CONFIGURATION FILES MENU
1) Display Virtualization Engine Map
2) Save Virtualization Engine Map
3) Verify Virtualization Engine Map
4) Help
5) Return
Select configuration option above:> 1
Do you want to poll the live system (time consuming) or view the file [l|f]: l