Seiko FB-900 - Manual (Page 102)

3-43 — 3. Setup options —
This function specifies whether or not to perform the
skew detection for checking whether paper has been
loaded manually on the skew.
If YES is selected, the printer ejects the paper loaded on the skew.
Out-of-paper detection
Function
#
63
Skew detection
Function
#
64
63 P.OUT DTCT
DETECT: NO
Out-of-paper detection is
not performed.
Out-of-paper detection is
performed.
DETECT: YES
Setting procedures
Setting procedures
This function specifies whether or not to perform paper
bottom detection.
When NO is selected, printing continues for the page length that is
specified and out-of-paper is ignored even when the paper is out.
64 P.SKEW DTCT
DETECT: NO Skew detection is not performed.
Skew detection is performed. DETECT: YES
Supplementary notes
This function should be set to NO when printing on paper
with binding holes or when using paper on which a
pattern is printed on the back.
#
1~#
9
#10
~
#20
#20
~
#29
#30
~
#38
#40
~
#44
#50,
#51
#70
~
#79
#80
~
#84
#90
~
#95
#60
~
#67