Seiko FB-900 - Manual (Page 60)

3
. Setup options
3-1 — 3. Setup options —
The setup modes consist of the SETUP MODE and EXTENDED SETUP
MODE.
The SETUP MODE is used to set the parameters that can be saved in
the format memories (memo 1 to memo 6). The EXTENDED SETUP
MODE is used to set other parameters.
● The following parameters can be set in the SETUP MODE.:
#1. MULTIPART (Printing pressure)
#2. HEAD ADJUSTMENT (Paper thickness adjustment)
#3. TOF ADJUSTMENT (Top-of-form setting)
#4. PAGE LENGTH (Page length of fanfold paper or paper size of cut sheet)
#5. PAPER WIDTH (Fanfold paper)
#6 ~ 9. Printing margin setting
#10. QUALITY (Printing quality)
#11. FONT SELECT (Font selection)
#12. CHARACTER PITCH (Character pitch)
#13. LF PITCH (Line feed pitch)
#14. ZOOM IN/OUT (Zooming magnification)
#15. PAPER FASTENER (Paper fastener mode setting)
#16. PERFORATION (Perforation head-up mode setting)
#17. FANFOLD FEED (Fanfold feed setting)
#18. PAPER QUALITY
#19. SELECT SAVE MEMORY (Memo 1 to memo 6)
#20. SELECT LOAD MEMORY (Memo 1 to memo 6)
● The following parameters can be set in the EXTENDED
SETUP MODE.:
Menus #20 to #95 are used mainly to set the following
parameters:
Emulation, font, paper handling, interface, bar codes,
enlarged characters.
● Entering the SETUP MODE:
Press the SET UP key to enter the SETUP MODE. To
quit the SETUP MODE, press the EXIT key.
● Entering the EXTENDED SETUP MODE:
Press the SET UP key and ALT key simultaneously to
enter the EXTENDED SETUP MODE. To quit the
EXTENDED SETUP MODE, press the EXIT key. The
printer is initialized automatically.
While data is input, the printer can enter the panel setup mode only
in the OFFLINE state.
The printer has setup modes, i.e., function setting modes that are unique to this
printer. The setup modes enable various printer functions to be set up with the
function keys on the operation panel.
This section provides an the outline of the setup modes and the details of the setup
functions.
Available functions in the setup modes
Entering the setup modes
Outline of the setup modes