Seiko FB-900 - Manual (Page 44)

1-21
5.
Insert a sheet of paper straight along the
paper guide.
If paper is inserted at a skewed angle, the skew sensor detects
and the paper is ejected.
—1. Setting up the printer—
●
Loading cut paper (manual paper feeding)
Insert sheets of paper one at a time along the paper
guide. Only one sheet at a time can be set on the
paper rack.
Select Manual feeding procedures 3
To alternate manual printing and printing with the
optional rear tractor or CSF, be sure to move the
paper guide to the left end after completion of
manual printing. Further, return the paper guide of the paper rack
to the left end. If printing is performed using the rear tractor or
CSF with the paper guide left in the manual feeding position,
paper loaded form the back will hit the paper guide, resulting in
paper jamming.
Move the Paper Guide and the Paper Support Guide to the left end.
Caution
Caution
When using wide paper, insert
the paper using the paper
support guide attached to the
left end of the paper rack.