Seiko FB-900 - Manual (Page 40)

1-17 —1. Setting up the printer—
3.
Adjust the tractor guides so that they are
located at almost the same interval. Lift and
release the tractor lock levers. Move the left
tractor to the triangle mark, then push down
the lever.
4.
Set fanfold paper onto the rear tractor. Push
down the lock lever of the right rear tractor.
●
Loading fanfold paper (Rear tractor)
Triangle mark
1
Tractor guide
Lock Release
1
Paper setting procedures usig rear tarctor 2
Push the lock levers of
both tractors to the
LOCK positions firmly.
Caution
Do not put your
finger under the
tractor cover.
CAUTION !
In order to load
less than 8 inch
width fanfold
paper, remove
one or two tractor
guides.