Seiko FB-900 - Manual (Page 202)

HD + EM + n (1B,7C,60,02,00,19,n)H (1) Paper path specification (PAPER PATH key)
(Setup Function #61)
n = 00H Front loading and rear ejection of fanfold paper
01H Front loading and front ejection of manually inserted paper
02H CSF loading and front ejection (Optional)
10H Front loading and upward ejection of fanfold paper
11H Front loading and upward ejection of manually inserted paper
12H Front loading and rear ejection of manually inserted paper
13H CSF loading and upward ejection (Optional)
4H Rear loading and front ejection of fanfold paper (Optional)
It is recommended that manual rear ejection not be used
together with another paper path application. Paper path
switching and the paper path switching mechanism are not
guaranteed if there is paper in the paper path switching
mechanism.
HD + F + n (1B,7C,60,02,00,46,n)H (2) Paper format selection (PAPER FORM key)
n = 0 : Selects format memory 1 (Memo 1)
n = 1 : Selects format memory 2 (Memo 2)
n = 2 : Selects format memory 3 (Memo 3)
n = 3 : Selects format memory 4 (Memo 4)
n = 4 : Selects format memory 5 (Memo 5)
n = 5 : Selects format memory 6 (Memo 6)
This command selects the format memory to be used for
the currently selected paper path.
HD + x + n (1B,7C,60,02,00,78,n)H (3) Character quality setting (QUALITY key)
n=0 LQ (Setup Function #10)
1 DRAFT
2 LQ
3 NLQ
4 DRAFT
5 S. D.
6 S. S. D.
7 HQDR
This command specifies the character quality in the
currently selected format memory.
HD +
+
(1B,7C,60,01,00,2B)H (4) TOF position setting (TOF SET key)
This command is valid only when paper is loaded.
It specifies the TOF position of the loaded paper.
●
Command
Hexadecimal
Control code
Corresponding setup function
Code
9-2 — 9. Software setup functions —
See pages 1-6, 1-7 and 3-42.
See pages 1-10 and 1-11.
See page 3-17.
See page 2-3.