Seiko FB-900 - Manual (Page 26)

1-3
● Installing the ribbon cassette
—1. Setting up the printer—
4.
Slide the ribbon toward the print head so
that the ribbon is lightly in contact with the
projection of the print head.
5.
Attach the cassette firmly to the mounting
plate. Turn the ribbon feed knob
counterclockwise.
Fit the right and left projections on the mounting plate to the holes in
the bottom of the ribbon cassette.
6.
Close the front cover.
Pull down the front cover slowly toward you with both hands from
both sides to close it.
Push down on both sides at the bottom of the front cover to close it
firmy. Two hands are required to engage and lockthe front cover on
both sides.
Slide
Slide
Projection
Ribbon feed knob