Tof adjustment, Function – Seiko FB-900 User Manual
Page 69
The TOF position is adjusted in units of 1/60 inch. It can be
adjusted between 0/60 inch (minimum) and 63/60 inches
(maximum) from the end of paper.
TOF adjustment
3-10
— 3. Setup options —
Function
#
03
3 TOF ADJUST
TOP: + n /60 IN
The value may be changed with the and keys.
0
≤
n
≤
63
DEFAULT : n=14
This function specifies the top of form (TOF)
position.
When paper is loaded, the printer detects the end of the paper and
determines the printing start position based on the detected paper
end. That position is the top of the form (TOF).
Setting procedures
Supplementary notes
Though the TOF position can be set from 0/60
inch (0 mm), paper may jam if it is set to a
value between 0/60 inch to 9/60 inch. Normally, it is
recommended that the TOF position be set to 14/60 inch
(approximately 6 mm) from the paper end.
Caution
#
1~#
9
#10
~
#20
#20
~
#29
#30
~
#38
#40
~
#44
#50,
#51
#60
~
#67
#70
~
#79
#80
~
#84
#90
~
#95