Seiko FB-900 - Manual (Page 125)

4-9 — 4. Functions —
The printer can execute test printing.
1.
Keep the ONLINE and REVERSE LF keys depressed
and turn on the printer.
2.
The following message will be displayed on the LCD.
The printer starts test printing.
3.
To terminate test printing, turn the power switch to
off.
Key shortcut functions are executed by pressing and holding
the corresponding keys while simultaneously turning on the
printer power. The following table shows the available
shortcut functions.
Executing test printing
Key shortcut functions
DEMO PRINT LQ
Note that, if the EEPROM is initialized, all the data
specified in the EEPROM is deleted.
Operation
Self Test Draft
Self Test LQ
Hex Dump Draft
Hex Dump LQ
Demo Print Draft
Demo Print LQ
Vertical Alignment
EEPROM Initialization
ONLINE FORM FEED LINE FEED REVERSE LF PAPER FORM PAPER PATH TEAR OFF EJECT/LOAD SET UP ALT Power
Operation procedures
●
Functions