Seiko FB-900 - Manual (Page 48)

1-25
8.
Turn the paper guide lock levers to the
RELEASE positions to adjust the paper
width.
9.
Turn the paper guide lock levers to the
LOCK positions.
—1. Setting up the printer—
●
Printing using the cut sheet feeder (Option)
1
Mark
Adjust the edge of the paper guide to
appriximately 2mm left (outside) of the
triangle mark.
CARD
Paper guide lock lever
Postcard changeover lever
When printing on postcards,
turn this lever down.
Release
Lock
Printing procedures using CSF 4
The triangle mark shows the printing start
position at the left of the paper.
Adjust the paper guide
to remove the gap
between the paper and
the paper guide, ensuring
that the paper does not press
too tightly against the paper
guide to avoide faulty
feeding.