Seiko FB-900 - Manual (Page 106)

3-47
Printer select command
— 3. Setup options —
Function
#
71 This function specifies whether or not to perform the
printer select command.
Setting procedures
71 SLCT IN ENBL
SLCT IN: 1
SLCT IN: 0
Printer select command is always
accepted.
SLCT IN: I/F
Printer select command is always
ignored.
Printer select command is accepted
when SELECT IN signal is set high.
It is ignored when SELECT IN
signal is set low.
Parity bit (Serial I/F)
Function
#
72
Setting procedures
This function specifies the parity bit when the serial
interface is used.
72 PARITY BIT
PARITY : EVEN
Parity check is not executed.
PARITY : ODD
Even number check is executed
Odd number check is executed.
PARITY : NON
#
1~#
9
#10
~
#20
#20
~
#29
#30
~
#38
#40
~
#44
#50,
#51
#70
~
#79
#80
~
#84
#90
~
#95
#60
~
#67