Seiko FB-900 - Manual (Page 45)

1-22
1.
Press the EJECT/LOAD key to move back
the fanfold paper.
2.
Enter the EXTENDED SETUP MODE
according to the proceures shown below
and select #60 OPTION on the menu. Select
CSF (cut sheet feeder).
3.
Detach the rear printer cover from the
printer.
—1. Setting up the printer—
●
Printing using the cut sheet feeder (Option)
Printing procedures using CSF 1
An optional cut sheet feeder is available for this printer. The cut sheet feeder is
useful for continuous printing on cut sheets.
The paper holder of the cut sheet feeder accommodates a maximum of 150 sheets
(of 55 kg paper). Normal paper and multipart paper can be used.
SET UP
F.TR REAR 11 x 10 20. EMULATION
60. OPTION OPTION: CSF
NOT INSTALL *
60. OPTION
OPTION: CSF *
ENTER EXIT
F.TR REAR 11 x 10
ALT
60. OPTION
INITIAL
INITIAL
OPTION: CSF
1
Leg
Leg
Pull the upper
part of the rear
printer cover to
the front to
detach it from the printer.
When attaching the rear
printer cover, insert the
two legs into the printer
and then press the rear
printer cover to lock it.