Seiko FB-900 - Manual (Page 95)

3-36 — 3. Setup options —
Setting procedures
Validity of bar code and enlarged character
Function
#
40
40 BC / L.CHR
BC: IGNORED Bar code and enlarged character are invalid.
Bar code and enlarged character are valid. BC: MODE 1
BC: MODE 2
This function specifies whether or not to activate the
bar code and enlarged character function. If MODE 1
or MODE 2 is selected, the bar code and enlarged
character can be printed.
If MODE 1 is selected, ESC SI or ESC SO cannot be used for
the bar code data start or stop command.
If MODE 2 is selected, ESC SI or ESC SO can be used for the
bar code data start or stop command.
See page 5-1 for details of the bar code.
See page 5-16 for details of the enlarged character.
#1
~
#
9
#10
~
#20
#20
~
#29
#30
~
#38
#40
~
#44
#50,
#51
#60
~
#67
#70
~
#79
#80
~
#84