Seiko FB-900 - Manual (Page 35)

1-12
1.
Check the rating of the fanfold paper to be
used that is marked on the side of the
package.
2.
Press the PAPER PATH key to select the
desired paper path.
—1. Setting up the printer—
●
Loading fanfold paper (Front tractor)
Fanfold paper setting procedures 1
This section describes how to set fanfold paper for front loading and rear ejection
or front loading and top ejection. Before setting fanfold paper, it is necessary to
specify the page length, paper width, etc. on the SETUP MODE.
Rating
10 X 11 - 1P
Page length Paper width
Fanfold paper rating marked on side of package (Example)
Multipart paper
(Number of sheets)
Paper loading direction Paper loading direction
F.TR REAR 11 x 15 F.TR TOP 11 x 15
1
1