Seiko FB-900 - Manual (Page 150)

5-20 — 5. Bar code and enlarged character function —
(8) All-character set for enlarged characters: DC4 DC4 d
Format: ASCII DC4 DC4 d n d1 d2...dn
Hex 14 14 64 n d1 d2...dh
Decimal 20 20 100 n d1 d2...dn
Function: Specifies the all-character set for enlarged characters.
1
≤
n
≤
255
0
≤
d
≤
255
Data with a number specified with the parameter “n” is processed as
character codes. If n = 0, this sequence is ignored.
(9) Selecting an enlarged character font: DC4 DC4 f
Format: ASCII DC4 DC4 f n
Hex 14 14 66 n
Decimal 20 20 102 n
Function: Specifies the font (typeface) of enlarged characters as shown
below.
n = 0: Roman
1: Sans serif
2: Courier
3: Prestige
4: Script
5: OCT-B
6: OCR-A
7: Gothic
8: Orator
9: Orator-S
The MSB of the parameter is masked. Any parameters other than those
shown above are ignored.
If the FONT LOCK option is set to YES in the EXTENDED SETUP
MODE, this command is ignored.
The default is the setting selected in the setup mode.
●
Enlarged character function