Seiko FB-900 - Manual (Page 57)

●
Control panel operations
2-3 — 2. Control panel operations —
4 TOF SET
(ALT + PAPER PATH keys)
• The TOF SET key is valid only when paper is loaded. When the TOF SET
key is pressed, the current printing position is regarded as the TOF position.
• The TOF ADJUST option on the SETUP MODE specifies the position when
loading paper. The TOF SET key becomes valid after paper has been
loaded.
• If the TOF position is changed when cut sheet paper is used, the changed
TOF position is valid only for the paper already loaded.
• If the EJECT/LOAD key is pressed when fanfold paper is loaded, the paper
is fed back to the parking position. When it is pressed when cut sheet paper
is loaded, the paper is ejected.
• When the EJECT/LOAD key is pressed under the condition where fanfold
paper is at the parking position, the paper is loaded to the TOF position.
• When the EJECT/LOAD key is pressed with no paper in the manual mode,
the key is ignored. When it is pressed with paper loaded in the manual
mode, the printer ejects the paper.
• When the EJECT/LOAD key is pressed with no paper in the CSF mode, the
printer loads paper. When it is pressed with paper loaded in the CSF mode,
the printer ejects the paper.
PAPER PATH
TOF SET
EJECT/LOAD
EJECT/LOAD
QUALITY
5
ALT
QUALITY
EJECT/LOAD
QUALITY
ALT
6
LCD
LQ
NLQ
HQDR
DRAFT
S.D.
S.S.D.
ESC x 1
LQ is selected.
LQ
NLQ
LQ
LQ
S.D.
S.S.D.
ESC x 0
Draft is selected.
Draft
Draft
HQDR
Draft
S.D.
S.S.D. Normal
High speed 1
High speed 2
High speed 2
High speed 2
High speed 2
Press the QUALITY key to display the currently selected printing quality on
the LCD. Continue to depress the key to display the printing qualities in the
following order.
To select the displayed printing quality, press the ENTER key.
LQ NLQ HQDR
DRAFT S.D. S.S.D.
The #10 QUALITY menu selected from the SETUP MODE provides
the same functions as the QUALITY key. Priority is given to the last
setting. Thus, if the printing speed is changed on the menu after setting
it with the QUALITY key, the changed printing speed on the menu is
selected.
If "YES" is selected with the QUALITY LOCK option on the
EXTENDED SETUP MODE, or "S.D." or "S.S.D." is selected with the
QUALITY option on the SETUP MODE, all software commands for
changing the printing quality are ignored.
If "S.D." is selected, the draft characters are printed at 12 cpi at a speed
1.2 times as high as the normal speed. If "S.S.D." is selected, the
characters are printed at 15 cpi at a speed 1.5 times as high as the
normal speed. When "LQ" is not selected, 180/360/120/240-DPI
graphics are printed at high speed with lower bit density.
(ALT + EJECT/LOAD keys)
(When in the EPSON mode)
Graphic speed
Function Keys 3