Seiko FB-900 - Manual (Page 138)

5-8 — 5. Bar code and enlarged character function —
● Bar codes are printed at normal LQ 10 cpi (158 cps) print
speed when the printing density is 120 dpi or at Dark 1 LQ
10 cpi (79 cps) print speed when the printing density is 180
dpi. This does not apply to printing paths involving HRI
printing or duty control.
● Bar codes and normal characters are printed separately.
When the bar code data sequence is processed, print data
other than bar code data contained in the buffer is printed.
When print data other than bar code data is input, bar
code data contained in the buffer is printed.
● Like the right margin overflow processing for character
data, data preceding bar code data is printed and the bar
code data is printed from the left margin on the following
line if the data exceeds the right margin.
If bar code data cannot be printed between the left and
right margins, the bar code data is ignored.
● When the number of bar code symbols in the buffer
reaches 68, printing starts. (Bar code buffer full printing)
● If the vertical line feed pitch is smaller than the bar code
height, reverse feeding is performed to move to the
following printing position.
● If an out-of-paper error is detected in a bar code printing
path, the following paths are printed on the following
form.
Printing bar codes
● Bar code function