Sun Microsystems 5602 - Manual (Page 13)

59097-01 A 1-1
Section 1
Introduction
This manual describes the switch management tools which include the SANsurfer
Switch Manager application (version 5.00) and the Command Line Interface (CLI)
for the SANbox 5602 Fibre Channel switch (firmware version 5.0). The SANbox
5602 switch is a 20-port non-blocking Fibre Channel switch. This manual defines
the features, components, and performance characteristics of the SANbox 5602
switch. The SANsurfer Switch Manager application is the primary focus of this
manual which is organized as follows:
„ Section 1 describes the intended audience for this manual, related
materials, and technical support.
„ Section 2 describes how to use SANsurfer Switch Manager, its menus, and
its displays.
„ Section 3 describes fabric management tasks.
„ Section 4 describes switch management tasks.
„ Section 5 describes port and device management tasks.
„ Appendix A describes the command line interface.
A glossary of terms and an index are also provided.
1.1
Intended Audience
This manual introduces the switch management products and explains their
installation and use. It is intended for users responsible for installing and using
switch management tools.
1.2
Related Materials
Refer to the following manuals for information about switch hardware and
installation.
„ SANbox 5602 Fibre Channel Switch Installation Guide, publication number
59096-01 Rev. A.
1.3
JDOM License
This product includes software developed by the JDOM Project
(http://www.jdom.org/). Copyright (C) 2000-2002 Brett McLaughlin & Jason
Hunter. All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met: