Sun Microsystems 5602 - Manual (Page 97)

3 – Managing Fabrics
Zoning a Fabric
59097-01 A 3-51
0
3.7.4.4
Removing a Zone from a Zone Set or from All Zone Sets
You can remove a zone from a zone set or from all zone sets in the database.
1. In the faceplate display, open the Zoning menu and select Edit Zoning to
open the Edit Zoning dialog.
2. In the Zone Sets tree, select the zone(s) to be removed.
3. Open the Edit menu, and select Remove to remove the zone from the zone
set, or select Remove from All Zones to remove the zone from all zone
sets.
4. Click the Apply button to save changes to the zoning database.
Alternatively, you may use shortcut menus to remove a zone from a zone set or
from all zone sets in the database.
3.7.4.5
Removing a Zone Set
Removing a zone set from the database affects the member zones in the following
ways.
„ Member zones that are members of other zone sets are not affected.
„ The orphan zone set is created by the application automatically to hold the
zones which are not in any set. The orphan zone set cannot be removed and
is not saved on the switch.
To delete a zone set from the database, do the following:
1. In the faceplate display, open the Zoning menu and select Edit Zoning to
open the Edit Zoning dialog.
2. In the Zone Sets tree, select the zone set to be removed.
3. Open the Edit menu, and select Remove to remove the zone set.
4. Click the Apply button to save changes to the zoning database.
Alternatively, you may use shortcut menus to remove a zone set from the
database. However, the orphan zone set can not be removed.