Sun Microsystems 5602 - Manual (Page 257)

A – Command Line Interface
Set Setup Command
59097-01 A A-83
0
services
Prompts you in a line-by-line fashion to enable or disable switch services.
Table A-24 describes the switch service parameters. For each parameter, enter a
new value or press the Enter key to accept the current value shown in brackets.
Note: Use caution when disabling TelnetEnabled and GUIMgmtEnabled; it is
possible to disable all Ethernet access to the switch.
Table A-24. Switch Services Settings
Entry Description
TelnetEnabled Enables (True) or disables (False) the ability to manage
the switch over a Telnet connection. Disabling this service
is not recommended. The default is True.
SSHEnabled Enables (True) or disables (False) Secure Shell (SSH)
connections to the switch. SSH secures the remote
connection to the switch. To establish a secure remote
connection, your workstation must use an SSH client. The
default is False.
GUIMgmtEnabled Enables (True) or disables (False) out-of-band
management of the switch with SANsurfer Switch
Manager, the SANsurfer Switch Manager Application
Application Programming Interface, SNMP, and CIM. If this
service is disabled, the switch can only be managed
inband or through the serial port. The default is True.
SSLMgmtEnabled Enables (True) or disables (False) secure SSL connections
for management applications including SANsurfer Switch
Manager, the SANsurfer Switch Manager web applet,
SANsurfer Switch Manager Application Programming
Interface, and the CIM server. The default is False.
„ To enable secure SSL connections, you must first
synchronize the date and time on the switch and
workstation.
„ This service must be enabled to authenticate users
through a RADIUS server.
„ Enabling SSL automatically creates a security
certificate on the switch.
„ To disable SSL when using a user authentication
RADIUS server, the RADIUS server authentication
order must be local.