Sun Microsystems 5602 - Manual (Page 283)

A – Command Line Interface
Show Log Command
59097-01 A A-109
0
Show Log Command
Displays the contents of the log or the parameters used to create and display
entries in the log. The log contains a maximum of 1200 entries. When the log
reaches its entry capacity, subsequent entries overwrite the existing entries,
beginning with the oldest.
Authority None
Syntax show log
[number_of_events]
component
display [filter]
level
options
port
settings
Keywords [number_of_events]
Specifies the number of the most recent events to display from the event log.
[number_of_events] must be a positive integer.
component
Displays the components currently being monitored for events. The components
are as follows:
All
Monitors all components.
Chassis
Monitors chassis hardware components such as fans and power supplies.
Eport
Monitors all E_Ports.
Mgmtserver
Monitors management server status.
Nameserver
Monitors name server status.
None
Monitor none of the component events.
Other
Monitors other miscellaneous events.
Port
Monitors all port events
SNMP
SNMP events.
Switch
Monitors switch management events.