Sun Microsystems 5602 - Manual (Page 226)

A – Command Line Interface
Reset Command
A-52 59097-01 A
0
Enter the Show Setup System command to display system configuration
values.
Enter the Show Config Security command to display security configuration
values.
Table A-16. System Configuration Defaults
Parameter Default
Ethernet Network Discovery Static
Ethernet Network IP Address 10.0.0.1
Ethernet Network IP Mask 255.0.0.0
Ethernet Gateway Address 10.0.0.254
Admin Timeout 30 minutes
InactivityTimeout 0
LocalLogEnabled True
RemotelogEnabled False
RemoteLogHostAddress 10.0.0.254
NTPClientEnabled False
NTPServerAddress 10.0.0.254
EmbeddedGUIEnabled True
Table A-17. Security Configuration Defaults
Parameter Default
AutoSave True
FabricBindingEnabled True