Sun Microsystems 5602 - Manual (Page 284)

A – Command Line Interface
Show Log Command
A-110 59097-01 A
0
Zoning
Monitors zoning conflict events.
display [filter]
Displays log events on the screen according to the component or severity level
filter given by [filter]. [filter] can be one of the following:
Info
Displays all informative events.
Warning
Displays all warning events.
Critical
Displays all critical events.
Eport
Displays all events related to E_Ports.
Mgmtserver
Displays all events related to the management server.
Nameserver
Displays all events related to the name server.
Port [port_number]
Displays all events related to the port given by [port_number].
SNMP
Displays all events related to SNMP.
Switch
Displays all events related to switch management.
Zoning
Displays all events related to zoning.
level
Displays the event severity level logging setting and the display level setting.
options
Displays the options that are available for configuring event logging and automatic
display to the screen. Refer to the for information about how to configure event
logging and display level.
port
Displays the ports being monitored for events. If an event occurs which is of the
defined level and on a defined component, but not on a defined port, no entry is
made in the log.
settings
Displays the current filter settings for component, severity level, port, and display
level. This command is equivalent to executing the following commands
separately: Show Log Component, Show Log Level, and Show Log Port.