Sun Microsystems 5602 - Manual (Page 158)

5 – Managing Ports
Configuring Ports
5-10 59097-01 A
0
5.2
Configuring Ports
The port settings or characteristics for 1-Gbps/2-Gbps/4-Gbps and 10-Gbps ports
are configured using the Port Properties dialogs shown in
Figure 5-2 . To open the
corresponding type of Port Properties dialog, select one or more ports, open the
Port menu and select Port Properties or Port Properties 10G.
Figure 5-2. Port Properties Dialog
The 1-Gbps/2-Gbps/4-Gbps and 10-Gbps Port Properties dialogs displays the
switch name and the selected ports. Use the Port Properties dialogs to change the
following parameters:
„ Port state
„ Port speed (1-Gbps/2-Gbps/4-Gbps only)
„ Port type
„ I/O Stream Guard (RSCN Suppression)
„ Device scan