Sun Microsystems 5602 - Manual (Page 58)

3 – Managing Fabrics
Securing a Fabric
3-12 59097-01 A
0
3.2.4.3
Create Security Group Dialog
Use the Create Security Group dialog, shown in Figure 3-6 , to add a security
group to a security set. The Create Security Group dialog is displayed after
clicking the Security Group button on the toolbar, or after you right-click on a
security set in the graphic window and select Create a Security Group from the
popup menu.
Figure 3-6. Create Security Group Dialog
The naming conventions for all security groups are listed below.
„ Must start with a letter
„ All alphanumeric chars [aA- zZ] [0-9]
„ The symbols $ _ - and ^ are the only symbols allowed