Sun Microsystems 5602 - Manual (Page 189)

A – Command Line Interface
CIMSubscription Command
59097-01 A A-15
0
Examples The following is an example of the CIMSubscription Create command:
SANbox Manager (admin-cim) #> cimsubscription create subscription_1
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
FilterID values: 1 = Create:ComputerSystem
2 = Modify:ComputerSystem
3 = Delete:ComputerSystem
4 = Create:FCPort
5 = Modify:FCPort
6 = Delete:FCPort
Name subscription_1
FilterID (see allowed options above) [Create:ComputerSystem]
EnabledState (True / False) [True ]
Duration (decimal value, 0-720000 secs, 0=forever) [0 ]
Finished configuring attributes.
This configuration must be saved with the cim save command
before it can take effect, or to discard this configuration
use the cim cancel command.