1 syslog, 2 select source dialog, Syslog -35 – Sun Microsystems 5602 User Manual
Page 139: Select source dialog -35, Syslog dialog -35
4 – Managing Switches
Managing Switch Stacks
59097-01 A
4-35
0
4.8.1
Syslog
The Syslog dialog enables you to save the log information for the stack to a
remote host that supports the syslog protocol. Use the Syslog dialog to enable
remote logging for the stack. Refer to
for more
information.
Figure 4-15. Syslog Dialog
4.8.2
Select Source Dialog
The Select Source dialog enables you to select the initial zoning configuration to
be loaded into the Edit Zoning dialog when making zoning changes to all switches
in a stack. The Select Source dialog is only displayed if the zoning configuration
on all switches in the stack is not identical. To display the Select Source dialog,
select a switch stack icon in the fabric tree (left-pane), open the Zoning menu and
select Edit Zoning. Select a switch in the Source Switch list and click the OK
button to open the Edit Zoning dialog with the zoning configuration of the selected
(source) switch displayed. The zoning changes made to the source switch in the
Edit Zoning dialog are applied to all switches in the stack.