Sun Microsystems 5602 - Manual (Page 286)

A – Command Line Interface
Show Perf Command
A-112 59097-01 A
0
Show Perf Command
Displays port performance in frames/second and bytes/second. If you omit the
keyword, the command displays data transmitted (out), data received (in), and
total data transmitted and received in frames/second and bytes per second.
Authority None
Syntax show perf
byte [port_number]
inbyte [port_number]
outbyte [port_number]
frame [port_number]
inframe [port_number]
outframe [port_number]
errors [port_number]
Keywords [port_number]
Displays continuous performance data in total bytes/second transmitted and
received for the port group (0–15 or 16–19) that includes [port_number]. If you
omit [port_number], ports 0–15 are displayed. Type “q” and press the Enter key to
stop the display.
[port_number]
Displays continuous performance data in bytes/second received for the port group
(0–15 or 16–19) that includes [port_number]. If you omit [port_number], ports
0–15 are displayed. Type “q” and press the Enter key to stop the display.
[port_number]
Displays continuous performance data in bytes/second transmitted for the set of
16 ports (0–15 or 16–19) that includes [port_number]. If you omit [port_number],
ports 0–15 are displayed. Type “q” and press the Enter key to stop the display.
[port_number]
Displays continuous performance data in total frames/second transmitted and
received for the set of 16 ports (0–15 or 16–19) that includes [port_number]. If you
omit [port_number], ports 0–15 are displayed. Type “q” and press the Enter key to
stop the display.
[port_number]
Displays continuous performance data in frames/second received for the port
group (0–15 or 16–19) that includes [port_number]. If you omit [port_number],
ports 0–15 are displayed. Type “q” and press the Enter key to stop the display.
[port_number]
Displays continuous performance data in frames/second transmitted for the port
group (0–15 or 16–19) that includes [port_number]. If you omit [port_number],
ports 0–15 are displayed. Type “q” and press the Enter key to stop the display.