Sun Microsystems 5602 - Manual (Page 163)

5 – Managing Ports
Resetting a Port
59097-01 A 5-15
0
3. Designate Donor Ports: Select available ports and click >> to move the port
into the Selected Donor Port column shown in
Figure 5-3 . Match the number
of ports needed with the number of designated donor ports. Click the Next
button.
Figure 5-3. Designate Donor Ports
4. Verify Requested Changes: Review the extended distance requests and the
selected donor ports. Click the Finish button to apply the changes, and
redistribute the credits.
5.4
Resetting a Port
The Reset Port option reinitializes the port using the saved configuration. To reset
a port, do the following:
1. In the faceplate display, select the port(s) to be reset.
2. Open the Port menu and select Reset Port.
Note: As credits are used, the Logged-In LEDs on the corresponding donor
ports illuminate continuously. In addition, donor port Activity LEDs will
reflect the same traffic as the recipient port. Donor ports whose credits
are being used are unavailable to devices that are connected to them.