Sun Microsystems 5602 - Manual (Page 280)

A – Command Line Interface
Show Config Command
A-106 59097-01 A
0
Show Config Command
Displays switch, port, alarm threshold, security, and zoning for the current
configuration.
Authority None
Syntax show config
port [port_number]
security
switch
threshold
zoning
Keywords port [port_number]
Displays configuration parameters for the port number given by [port_number].
Ports are numbered beginning with 0. If [port_number] is omitted, all ports are
specified.
security
Displays the security database Autosave parameter value.
switch
Displays configuration parameters for the switch.
threshold
Displays alarm threshold parameters for the switch.
zoning
Displays zoning configuration parameters for the switch.
Examples The following is an example of the Show Config Port command:
SANbox Manager #> show config port 3
Port Number: 3
------------
AdminState Offline
LinkSpeed Auto
PortType GL
SymbolicName Port3
ALFairness False
DeviceScanEnabled True
ForceOfflineRSCN False
ARB_FF False
InteropCredit 0
ExtCredit 0
FANEnabled True
AutoPerfTuning False
LCFEnabled False
MFSEnabled True