Sun Microsystems 5602 - Manual (Page 224)

A – Command Line Interface
Reset Command
A-50 59097-01 A
0
Enter the Show Setup SNMP command to display SNMP configuration
values.
Enter the Show Setup Radius command to display RADIUS configuration
values.
Table A-13. SNMP Configuration Defaults
Parameter Default
SNMPEnabled True
Contact <syscontact undefined>
Location <sysLocation undefined>
Description SANbox 5602 FC Switch
Trap [1-5] Address Trap 1: 10.0.0.254; Traps 2–5: 0.0.0.0
Trap [1-5] Port 162
Trap [1-5] Severity Warning
Trap [1-5] Version 2
Trap [1-5] Enabled False
ObjectID 1.3.6.1.4.1.1663.1.1.1.1.24
AuthFailureTrap False
ProxyEnabled True
Table A-14. RADIUS Configuration Defaults
Parameter Default
DeviceAuthOrder Local
UserAuthOrder Local
TotalServers 1
DeviceAuthServer False
UserAuthServer False
AccountingServer False
ServerIPAddress 10.0.0.1
ServerUDPPort 1812
Timeout 2 seconds