Sun Microsystems 5602 - Manual (Page 258)

A – Command Line Interface
Set Setup Command
A-84 59097-01 A
0
EmbeddedGUIEnabled Enables (True) or disables (False) the SANsurfer Switch
Manager web applet. The web applet enables you to point
at a switch with an internet browser and run SANsurfer
Switch Manager through the browser. This parameter is
the master control for the Set Setup System command
parameter, EmbeddedGUIEnabled. The default is True.
SNMPEnabled Enables (True) or disables (False) the management of the
switch through third-party applications that use the Simple
Network Management Protocol (SNMP). This parameter is
the master control for the Set Setup SNMP command
parameter, SNMPEnabled. The default is True.
NTPEnabled Enables (True) or disables (False) the Network Time
Protocol (NTP) which allows the synchronizing of switch
and workstation dates and times with an NTP server. This
helps to prevent invalid SSL certificates and timestamp
confusion in the event log. The default is False. This
parameter is the master control for the Set Setup System
command parameter, NTPClientEnabled.
The default is False.
CIMEnabled Enables (True) or disables (False) the management of the
switch through third-party applications that use the
Common Information Model (CIM). The default is True.
FTPEnabled Enables (True) or disables (False) the File Transfer
Protocol (FTP) for transferring files rapidly between the
workstation and the switch. The default is True.
MgmtServerEnabled Enables (True) or disables (False) the management of the
switch through third-party applications that use GS-3
Management Server (MS). This parameter is the master
control for the Set Config Port command parameter,
MSEnable. The default is False.
Table A-24. Switch Services Settings (Continued)
Entry Description