Sun Microsystems 5602 - Manual (Page 207)

A – Command Line Interface
Hardreset Command
59097-01 A A-33
0
Hardreset Command
Resets the switch and performs a power-on self test. This reset disrupts traffic,
activates the pending firmware, and clears the alarm log. To save the alarm log
before resetting, refer to the
”Set Log Command” on page A-75 .
Authority Admin session
Syntax hardreset
Notes To reset the switch without a power-on self test, refer to the ”Reset Command” on
page A-45 .
To reset the switch without disrupting traffic, refer to the ”Hotreset Command” on
page A-36 .