Liebert Universal Monitor - Manual (Page 112)

Setup Menu
104
A.6 S
ETUP
M
ENU
The Setup menu allows the user to configure the Universal Monitor—setting up inputs and outputs
and an input/output matrix to trigger actions, the modem and pagers, and system features such as
date and time. This menu also provides a vehicle for manually changing the state of an output to ON
or OFF, clearing active alarms and deleting records from the Universal Monitor’s alarm log, event log
and trend logs.
Main Menu
After connecting to the Service Terminal Interface, the Main Menu appears, as shown below.
• Choose 0 to access the features illustrated in this section.
Login Menu
The System and Control options require a password to prevent unauthorized users from making
changes to the system. After choosing 0 in the Main Menu above, the Login Menu appears:
• Enter the password, and the Setup Menu appears, as shown in the following section.
Main Menu
LIEBERT UNIVERSAL MONITOR
VX.XXX.X
LIEBERT CORPORATION COPYRIGHT 2003
ALL RIGHTS RESERVED
MAIN MENU
1=VIEW ACTIVE ALARMS
2=VIEW ALARM LOG
3=VIEW EVENT LOG
4=VIEW TREND LOG
5=VIEW INPUT & SENSOR STATUS
6=VIEW OUTPUT STATUS
7=VIEW PAGER NUMBERS
8=SILENCE ALARM
9=BACKUP LOG FILES
0=SETUP SYSTEM-LOGIN REQUIRED
SELECT A NUMBER:0
Login
YOU MUST LOGIN TO PERFORM
SETUP OR TO MAKE CHANGES
LOGIN WITH 4 CHARACTER
PASSWORD
>****
>INVALID PASSWORD, ENTER AGAIN
>PRESS <ESC> TO EXIT
>