Perform the feedback input, Test, Feedback input – Lincoln Electric COMMANDER SVM145-B User Manual
Page 123: Perform the pwm output test, Troubleshooting & repair, Warning feedback input test
TROUBLESHOOTING & REPAIR
F-67
F-67
COMMANDER 300
WARNING
FEEDBACK INPUT TEST
Service and repair should be performed by only Lincoln Electric factory trained personnel.
Unauthorized repairs performed on this equipment may result in danger to the technician or
machine operator and will invalidate your factory warranty. For your safety and to avoid elec-
trical shock, please observe all safety notes and precautions detailed throughout this manual.
If for any reason you do not understand the test procedures or are unable to perform the
test/repairs safely, contact the Lincoln Electric Service Department for electrical troubleshoot-
ing assistance before you proceed. Call 1-800-833-9353 (WELD).
DESCRIPTION
This test will determine if the weld current and voltage feedback circuits, and the circuits on
the control board that interface with the feedback circuits are functioning properly.
MATERIALS NEEDED
3/8" Wrench
5/16” Nut Driver
Multi-meter
Ammeter (for weld current)
Voltmeter (for weld voltage)
This procedure should take approximately 45 minutes to perform.