Lincoln Electric COMMANDER SVM145-B - Manual (Page 8)

Retur
n to Section TOC
Retur
n to Section TOC
Retur
n to Section TOC
Retur
n to Section TOC
Retur
n to Master TOC
Retur
n to Master TOC
Retur
n to Master TOC
Retur
n to Master TOC
INSTALLATION
A-2 A-2
COMMANDER 300
TECHNICAL SPECIFICATIONS - Commander 300
INPUT - DIESEL ENGINE
Make/Model Description Speed (RPM) Displacement Starting Capacities
System
Deutz 3 cylinder 1800 Full Load 125 cu. in. Electric Fuel: 25 gal.
F3L 1011F Air/cooled 1900 High Idle (2.05 liters) 12 VDC (94.6 liters)
diesel 1400 Low Idle
31 HP Oil: 6.3 qt.
@ 1800 RPM (6.0 liters)
RATED OUTPUT - WELDER
Duty Cycle Welding Output Volts at Rated Amps
100% 300 amps (DC Multi-purpose) 32 volts
60% 375 amps (DC Multi-purpose) 34 volts
OUTPUT - WELDER AND GENERATOR
Welding Range Max. Open Circuit Voltage Auxiliary Power 1
30 - 300 Amps DC 87 OCV 120/240 VAC
in 5 Ranges @ 1900 RPM 10,000 Watts, 60 Hz.
100% Duty Cycle
PHYSICAL DIMENSIONS
Height 2 Width Depth Weight
42.0 in. 31.5 in. 63.1 in. 1325 lbs.
1066.8 mm 800.1 mm 1602.7 mm 1683 lbs.(601 kg)
1
Output rating in watts is equivalent to volt-amperes at unity power factor.
Output voltage is within +/- 10% at all loads up to rated capacity. When welding, available auxiliary power will be reduced.
2
Top of Enclosure. Add 8.9” (16mm) for exhaust.