Troubleshooting & repair – Lincoln Electric COMMANDER SVM145-B User Manual
Page 73
TROUBLESHOOTING & REPAIR
F-17
F-17
COMMANDER 300
REASSEMBLY PROCEDURE
1. Output panel: Set the panel in place.
2. Install the five screws that mount the panel
at the top and bottom.
3. Attach the green ground lead.
4. Install the internal leads to the output termi-
nals.
5. Side panels, roof and door assembly:
Remove the fuel cap. With the help of an
assistant, carefully set the roof/door assem-
bly in place. Replace the fuel tank gasket
and the lift bail cover seal. Replace the fuel
cap. Install the exhaust pipe rain cap.
6. Install the right rear panel and the right and
left front panels. Raise the control panel
front and install the two screws at the roof
and the two at the sides.
7. Install the support rod and the #10-24 round
head screw, washer, and nut.
CASE COVER REMOVAL AND REPLACEMENT PROCEDURE
(continued)