Troubleshooting & repair, Normal weld voltage waveform (stick cc) – Lincoln Electric COMMANDER SVM145-B User Manual
Page 137
Advertising
TROUBLESHOOTING & REPAIR
F-81
F-81
COMMANDER 300
This is the typical DC output voltage
generated from a properly operating
machine. Note that each vertical
division represents 20 volts and that
each horizontal division represents 5
milliseconds in time.
The machine was loaded with a
resistance grid bank to 300 amps at
32 volts.
SCOPE SETTINGS
Volts/Div.....................20V/Div.
Horizontal Sweep .....5 ms/Div.
Coupling.............................DC
Trigger.........................Internal
NORMAL WELD VOLTAGE WAVEFORM (STICK CC)
MACHINE LOADED TO 300 AMPS AT 32 VOLTS
0 volts
20V
5ms
Advertising