Troubleshooting & repair – Lincoln Electric COMMANDER SVM145-B User Manual
Page 72
Advertising
TROUBLESHOOTING & REPAIR
F-16
F-16
COMMANDER 300
OUTPUT LEADS
(BEHIND PANEL)
GREEN
GROUND
LEAD
SCREWS
FIGURE F.3 – OUTPUT PANEL REMOVAL
CASE COVER REMOVAL AND REPLACEMENT PROCEDURE
(continued)
OUTPUT PANEL REMOVAL
1. Using the 3/4" wrench, remove the internal
leads from the positive and negative output
terminals. See Figure F.3.
2. Using the 3/8" wrench, remove the three
screws along the bottom of the output panel.
Then remove the two screws holding the top
of the panel. These are accessed in the con-
trol box, on the bottom at each side of the
box. See Figure F.3.
3. Using the 3/8" wrench, remove the green
ground lead from the panel.
4. The output panel can now be removed and
set aside.
Advertising