Roland VC-1 D-50 - Manual (Page 10)

10
Panel Descriptions
AC Inlet
Connect the included power cord to this inlet.
DIGITAL AUDIO INTERFACE Connector
These connectors input/output a digital audio signal (stereo; conforming to IEC60958). The output signal
is identical to the signal that is output from the MAIN OUT jacks.
* IEC60958 is a digital interface format used for consumer digital audio devices.
MIDI Connectors (IN, OUT, THRU)
Connect external MIDI devices here. Use MIDI cables (sold separately) to make connections.
MAIN OUT Jacks (L (MONO), R)
These jacks output the audio signal to the connected mixer/amplifier system in stereo. For mono output,
use the L jack. (p. 11)
Rear Panel
Display Functions
IN Receives MIDI messages from an external device.
OUT Transmits MIDI messages to an external device.
12 13 14 15
12
13
14
15
vc1_for_XT_e1 10 ページ ２００５年３月８日 火曜日 午後１２時５５分