Roland VC-1 D-50 - Manual (Page 60)

60
Tone Parameters
WG Mod (WG Modulation)
fig.09-27z(LCD_PitchWfMod)
LFO (LFO Mode)
fig.09-28e(LFO_Mode)
Selects one of the following four vibrato modes.
Value: OFF, (+), (-), A&L
ENV (P-ENV Mode)
fig.09-29e(P-ENV_Mode)
Selects one of the following three modes, determining how the
pitch is controlled by P-ENV.
Value: OFF, (+), (-)
Bend (Bender Mode)
Selects how the pitch is controlled by the bender lever as follows.
Value: OFF, KEY, NOM
Display Description
OFF No vibrato is obtained.
(+) Vibrato is on.
(-) Vibrato is on but inverted.
A&L
Vibrato can be obtained only by Aftertouch
and Bender Lever.
Display Description
OFF No alteration.
(+) Pitch changes with the set P-ENV curve.
(-) Pitch changes with the P-ENV curve inverted.
Display Description
OFF No pitch alteration by moving the lever right or the left.
KF Pitch changes within the Bender range, set in Patch Factors, plus Keyfollow (Pitch) of WG.
NOM Pitch changes within the Bender range, set in Patch Factors.
Normal
"-" is selected.
"+" is selected.
"-" is selected.
vc1_for_XT_e1 60 ページ ２００５年３月８日 火曜日 午後１２時５５分