Roland VC-1 D-50 - Manual (Page 75)

75
Settings for the Entire VC-1
The current settings of the system functions can be restored to a set of standard settings, or to the factory
settings (System Initialize).
fig.10-04a
1. Access the System Edit screen.
2. Touch <Init> , located in the lower right of the screen.
3. If you want the factory settings to be in effect the next time the
VC-1 is powered up, touch
<Write> to save the settings.
Initializing the System Settings
vc1_for_XT_e1 75 ページ ２００５年３月８日 火曜日 午後１２時５５分